Home | Products | Dealers / Distributors Enquiries | How To Order | Contact

PRODUCTS......MP-101WR Wireless Remote Control £199.95 inc VAT
 

MP-101WR Wireless Remote Control for MP-101 & MP-101 v360 Power Panner

This remote control device allows you to operate the MP-101 or MP-101 v 360 power panner wirelessly from a distance of up to 100 feet.  It replaces the wired 1m remote control pad that comes with the power panner. Up to 16 keychain transmitters can be used with 16 receivers to control 16 different pan tilt units in the same location at the same time. Up to 6 keychain transmitters can be used with one receiver to control one pan tilt unit. Operation Ensure your Power Panner is in the Manual mode (M), and has power connected to it Connect the control cable of the wireless control unit to the power panner Connect the AC or DC power supply to the 12v DC power jack. There is no power switch, the unit is "on" as soon as power is connected The continuously variable speed control is in the compartment on the reverse side of the receiver - slide the small cover off and turn the knob to adjust the speed Keep the antenna in the clear & elevated Transmitter key button functions: Nº 1 - Tilt Up and Nº 4 - Tilt Down Nº 3 - Pan Left and Nº 2 - Pan Right Important This device is not CE approved and is not legal to operate in the UK Please check with your country radio frequency controls for legal operation The unit operates on the 433Mhz waveband Not for use around dangerous environments such as High voltage, Explosive atmospheres or Moving equipment etc Specification  Works with MP-101 & MP-101v360 power panners  Dimensions: Hand Held Keychain Transmitter 2" High x 1.5" Wide x 0.5" Deep Receiver 5.5" High x 3.25" Wide x 1.5" Deep Receiver Power - 12v DC at 100 mA Operating Temperature 39º to 110º F Weight - less than 1-1/2 pounds Range - up to 100 feet Frequency - 433Mhz 120-240v AC Power supply included A 12v DC battery holder is included - holds 8 AAA batteries - lasts 5 to 15 hours dependant on usage (batteries not included) Power Cable - 3 feet long Control Cable - 20 feet long standard